Skip to content
Work / Civic / Golden Lantern
Menu

In development

Golden Lantern

At the Powell Street cable-car turnaround, a golden lantern of light orbs.

Civic · Powell Street, San Francisco, CA · 2027 target

Client
Union Square Alliance
Partners
Field Operations, concept, landscape architect and architect of record
Urban Art Projects, lighting co-designer and manufacturer
Rbhu, structural engineering
Silverman & Light, electrical engineering
Our role
Design development and engineering of the light
The software
In a design study, LiDAR finds each cable car and Lightpath OS lets the catenary lights follow it up the street. More on our software
Today
Issued for construction in October 2026. The target is 2027.
612
Orbs
114
Lanterns on the street

01 · The idea

Two layers of light

A field of light orbs, sparse at its skin and dense at its heart, held in a cast golden lattice. You look up into it from the plaza while the cable cars turn beside it.

The Powell Street Improvement Project, for San Francisco Public Works, is remaking the street from Market to Geary for the Union Square Alliance. Field Operations, its landscape architect, drew the lantern, and a field of globes hung on catenaries up three blocks. We developed it into a built design with Urban Art Projects, who co-design the lighting and will make it, and Clark Construction, who will build the street. For the catenary lanterns we engineered the light, the catenary and the controls.

Render: Powell Street at night from above, string lanterns on catenaries crossing the street up the hill, a cable car between them.
Render · in development. The lanterns up PowellDesign: Field Operations with Digital Ambiance. Rendering: Digital Ambiance
The Golden Lantern at night, seen from the street: a sphere of glowing orbs on a gold lattice, hung between four steel poles.
Loads about 3 MB when opened

Rendered live from the Rhino model for construction, with a 5’9” figure and a 10 ft grid. The lighting is illustrative.

02 · The present

It knows where the cable cars are

A design study, not yet built: LiDAR along Powell finds each cable car, the timetable feed fills the gaps, and Lightpath OS lets the catenary lights follow the cars up the street. Javier Martínez's simulation shows how it would play.

Design study · 06.2026TurntableEllisO’FarrellGearyS1S2S3S4S5The catenary lanterns over the street light where the car isSeen by LiDARBetween sensors, the timetable feedLightpath OS drives the light from the car's position0 ft6 ft10 ft24 ftLiDAR, 24 ft, looking down4 ft gapThe height filterCable car, found
It knows where the cable cars are
Simulation: LiDAR points along Powell Street picking out a cable car.
Design study · simulation.

03 · How it's built

How it's built

Prototypes before the street

Before anything goes over Powell, we prototype it. We assembled a lantern frame in our studio and lit it. Prototype orbs and a catenary lantern were weighed complete with their electronics, so the structural calculations use measured weights, not estimates. A cast node frame came back from the foundry for checking, and orb samples in three sizes settled the diffusion.

Assembling the gold prototype frame on the studio floor.
Wiring the prototype frame, lit green.
The prototype frame lit in color.
The prototype in the studio with the team at work.
Prototype frame, studio.1 / 4

Engineering the lattice

Each orb diffuses its light twice: a texture molded on the inside face, and an acrylic shell made in two halves joined at a silicone cord, with an LED at the center. We rationalized the lantern into a lattice that can be built, in seven slices, with a spine that carries the cast X nodes and tubes, painted bright gold. Four painted steel poles, tapering as they rise, carry it, and it hangs 19 ft 9 in clear above the plaza paving.

Power runs underground to junction boxes at each pole, then to power supplies inside the poles. Fiber carries the data to a lighting control gateway, and Lightpath OS will run the light. The construction documents went to San Francisco Public Works in June 2026, were signed at 100 percent, and were then issued for construction.

A gold-painted lattice tube at the foundry yard.
Sample finish, at the foundry.
Diagram: two layers of light in seven slices, slice 4 the spine.
Diagram: section of an orb with its LED, molded texture, shell and silicone joint, in three sizes.
Diagram: power, data and sensing from the street to every orb.
Two layers of light, seven slices.1 / 3
After SFPW sheet E-015, issued for construction 10/15/26
After SFPW sheet E-014, issued for construction 10/15/26
After SFPW sheet E-014, issued 10/15/26

1 / 3

Pinch to zoom, drag to move. Esc closes.

04 · Credits and operation

Credits

Poles
4, steel, 16 in tapering to 6 in
Issued for construction
October 2026
Target
2027
Client
Union Square Alliance
Owner
San Francisco Public Works
Concept, landscape architect and architect of record
Field Operations
Lighting co-designer and manufacturer
Urban Art Projects
Design development and engineering of the light
Digital Ambiance
Structural engineering
Rbhu
Electrical engineering
Silverman & Light
CM/GC
Clark Construction
LiDAR simulation
Javier Martínez, Digital Ambiance

Have a space like this one?

Send a brief · Tell us where it is and what it should do. We reply with questions, then a visit.