
Wave
Ansen Seale drew Wave. We engineered it to come off the wall one bar at a time.
- Client
- Hines Development
- Partners
- Ansen Seale, artist
UAP, curator - Our role
- Engineering, software, fabrication, installation
- The software
- A camera follows people through the passage, and TouchDesigner generates the wave from their movement. More on our software
- Today
- Running since 2023 on Lightpath OS, maintained and monitored remotely under a building services contract.
- 150
- LED bars
- 6
- Controllers
01 · The idea
A waveform in relief
Ansen Seale's Wave is a waveform drawn in light along a covered passage: from the far end it reads as one gesture, and up close it breaks into the relief of bars set at different depths. It answers whoever walks through, so each person passing becomes part of the line.
Fenton is Hines' mixed-use district on Cary Towne Boulevard, and Paseo 7 a covered passage through one of its buildings. Hines had already chosen Ansen and his concept. Robb Pope met Ansen at the CODAsummit, and early in 2022 Hines and Ansen asked us to engineer and build it with him. UAP, the curator, held the art package. An algorithm set each bar's length, mounting height and depth from the wall; depth comes from three spacer thicknesses, and the furthest bar stands about 3/4 in proud of the column face.





02 · The present
Light that keeps pace
A camera above the passage follows people as they walk through. Their movement sends ripples through the bars, in patterns generated live in TouchDesigner, so the wave doesn't repeat: warm fields of magenta and yellow, blue noise, a single bright line.

03 · How it's built
How it's built
Bench to passage
We tested diffusion early. Ansen wanted the look of sanded clear acrylic, and a narrow bar read brighter than a wide one. Prototype bars were assembled and lit on the bench, the mounting was tested and filmed, and the tracking was prototyped in TouchDesigner. On site in February, the team hung the rails, then the bars, finished the software in the passage and commissioned the piece, with Ansen there to set the flow of the content.
A bar built to come off the wall
The passage is covered but open to rain, cold and summer heat, and every bar had to stay within accessibility limits. The bar we drew is an aluminum channel with a polycarbonate lens and aluminum end caps, refined with the extrusion maker for weight, assembly and tolerance. Inside runs a sealed outdoor RGB pixel strip with waterproof connectors, made to length for each bar.
Unistrut rails run the length of each bay, and the bars clip on with quick-release buttons, so one can come off for repair without disturbing the rest; spare strips in every length let the site team swap one in. Power supplies and controllers sit on trays hidden behind the bars. Data runs over Cat6 to a server in the building's equipment room, and the building's own drawings carry dedicated circuits for the wall.
04 · Credits and operation
Kept running
Wave runs on Lightpath OS, our platform for keeping installations running. Under a building services contract with the property, we maintain it, monitor it remotely, and can change its behavior without a site visit.
- Bar width
- 1 in (25.4 mm)
- Dedicated circuits
- 4
- Software
- TouchDesigner
- Designed
- 2022
- Commissioned
- February 2023
- Client
- Hines Development
- Artist
- Ansen Seale
- Curator
- UAP
- Producer
- Robb Pope, Digital Ambiance
- Project manager and mechanical engineering
- Ramin Shambayati, Digital Ambiance
- Software
- Kendrick Feller, Digital Ambiance, and Alex Forkni
- Photography
- Ansen Seale















